Panasonic KX-TGP500 - Bell_Core_Pattern3_Timing; Bell_Core_Pattern4_Timing; Bell_Core_Pattern5_Timing; Ringtone_183_180_Enable

BELL_CORE_PATTERN3_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 3, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces
" section 14,
using 6 whole numbers separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 400,200,400,200,800,4000
BELL_CORE_PATTERN4_TIMING
Value Format Comma-separated Integer
Description Specifies the cadence, in milliseconds, of pattern ID 4, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces" section 14,
using 6 whole numbers separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 300,200,1000,200,300,4000
BELL_CORE_PATTERN5_TIMING
Value Format Integer
Description Specifies the cadence, in milliseconds, of pattern ID 5, described in the
LSSGR, GR-506-CORE, "Signaling for Analog Interfaces
" section 14.
Value Range 0–5000 (0: Infinite time)
Default Value 500
RINGTONE_183_180_ENABLE
Value Format Boolean
Description Specify whether to ring a local RBT when 180 is received after the early
media is established.
Value Range Y (Enable)
N (Disable)
Default Value
N
CONFIRM_TONE4_ENABLE
Value Format Boolean
Description Specifies whether a notification tone is sent to participants when a
conference either begins or finishes.
184 Administrator Guide Document Version 2013-02
4.5.3 Tone Settings