Panasonic KX-TGP500 - Codec Settings for G729 A Only

8.2.1 Codec Settings for G729A only
By
specifying the configuration parameters as shown in the following example, you can use only "G729A" for
line 1 as the codec settings.
Example
SDP_CODEC0_1="G729A"
SDP_CODEC1_1=""
SDP_CODEC2_1=""
SDP_CODEC3_1=""
SDP_CODEC4_1=""
SDP_PTYPE0_1="18"
SDP_PTYPE1_1="255"
SDP_PTYPE2_1="255"
SDP_PTYPE3_1="255"
SDP_PTYPE4_1="255"
CODEC_G711_REQ="0"
Note
• If you use only "G729A" for lines 2–8, specify the same settings by changing the suffix
"_1" to
"_2"–"_8".
• This listing shows the parameters required for setting "G729A" only. For details about the other settings,
see 8.2 Comprehensive Example of the Configuration File.
Document Version 2013-02 Administrator Guide 261
8.2.1 Codec Settings for G729A only