Web User Interface Reference HTTP User Agent (Page 72)
HTTP_SSL_VERIFY
Value Format Integer
Description Specifies whether to enable the verification of the root certificate.
Value Range
• 0 (No verification of root certificate)
• 1 (Simple verification of root certificate)
• 2 (Precise verification of root certificate)
Note
• If set to "0", the verification of the root certificate is disabled.
• If set to "1", the verification of the root certificate is enabled. In
this case, the validity of the certificate’s date, certificate’s chain,
and the confirmation of the root certificate will be verified.
• If set to "2", precise certificate verification is enabled. In this
case, the validity of the server name will be verified in addition
to the items verified when "1" is set.
Default Value 0
CFG_ROOT_CERTIFICATE_PATH
Value Format String
Description Specifies the URI of the root certificate.
Note
• Changing this setting may require restarting the unit.
Value Range Max. 255 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url
-path>"
– "<user>" must be less than 64 characters.
– "<password>" must be less than 64 characters.
– "<user>:<password>@" may be empty.
– The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
– ":<port>" can be omitted if you do not need to specify the
port number.
Default Value Empty string
172 Administrator Guide Document Version 2013-02
4.4.4 HTTP Settings
To Next Page
Loading...
