Panasonic KX-TGP500 - Call Control Settings; Conference_Server_Address; Emergency_Call[1-5]

Value Range
• 0 (Disable)
• 1 (Enable)
Note
• The format must be "x,x,x,x,x,x,x,x
" (x: line numbers 1 to 8
starting from the left).
• "1" must be specified only once as a line that can be seized
automatically when going off-hook in this format.
• If the line specified in this parameter is not specified as a line
that can be seized for the base unit in
"OUTGOING_CALL_LINE_BS", the base unit cannot make a
call.
Default Value 1,0,0,0,0,0,0,0
Web User Interface Reference Default (Page 107)
4.5.2 Call Control Settings
CONFERENCE_SERVER_ADDRESS
Value Format String
Description Specifies the URI for a conference server, which consists of a user part,
the "@" symbol, and a host part, for example,
"conference@example.com
".
Note
• Availability depends on your phone system.
Value Range Max. 127 characters
Default Value Empty string
Web User Interface Reference Conference Server Address (Page 108)
EMERGENCY_CALL[1–5]
Parameter Name Example EMERGENCY_CALL1, EMERGENCY_CALL
2, EMERGENCY_CALL3,
EMERGENCY_CALL4, EMERGENCY_CALL5
Value Format String
Description Specifies the phone numbers used for making emergency calls. A user
can dial any of the specified phone numbers at any time regardless of
any restrictions imposed on the unit. A maximum of 5 phone numbers
can be specified.
Note
• When a phone number is specified here, it will be prioritized
over
the setting specified in "DIAL_PLAN_[1–8]" in 4.7.1 Call
Control Settings.
Value Range Max. 24 characters
178 Administrator Guide Document Version 2013-02
4.5.2 Call Control Settings