Default Value Model number (example: TGP5nn)
Configuration File Reference HOST_NAME (Page 165)
Domain Name Server
Description Selects whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range
• Receive DNS server address automatically
• Use the following settings
– DNS1
– DNS2
Note
• If you select [Use the following settings
], specify the IP
address(es) of the primary and, if necessary, secondary DNS
server(s) manually. The permissible values are:
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Default Value Receive DNS server address automatically
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Configuration File Reference DHCP_DNS_ENABLE (Page 165)
3.4.1.3 Static Settings
Static IP Address
Description Specifies the IP address for the unit.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255
", "127.0.0.1", etc.)
Default Value Not stored.
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Configuration File Reference STATIC_IP_ADDRESS (Page 165)
Document Version 2013-02 Administrator Guide 67
3.4.1 Basic Network Settings
To Next Page
Loading...
