Panasonic KX-TGP500 - Line ID; SIP Server; Registrar Server Address; Registrar Server Port

Line ID
Description Specifies the unique ID used by the SIP registrar server.
Note
• When you use characters that are not allowed for [Phone
Number], you must specify [Phone Number] and then this
setting.
Value Range Max. 63 characters (except @)
Default Value Not stored.
Configuration File Reference LINE_ID_[1–8] (Page 215)
3.6.2.2 SIP Server
Registrar Server Address
Description Specifies the IP address or FQDN of the SIP registrar server.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference SIP_RGSTR_ADDR_[1–8] (Page 199)
Registrar Server Port
Description Specifies the port number to use for communication with the SIP
registrar server.
Value Range 1–65535
Default Value 5060
Configuration File Reference SIP_RGSTR_PORT_[1–8] (Page 199)
Proxy Server Address
Description Specifies the IP address or FQDN of the SIP proxy server.
Value Range Max. 127 characters
Default Value Not stored.
Configuration File Reference SIP_PRXY_ADDR_[1–8] (Page 198)
Proxy Server Port
Description Specifies the port number to use for communication with the SIP proxy
server.
Document Version 2013-02 Administrator Guide 89
3.6.2 SIP Settings [Line 1]–[Line 8]