Panasonic KX-TGP500 - Authentication Password; Dns; Enable DNS SRV Lookup; SRV Lookup Prefix for UDP

Configuration File Reference SIP_AUTHID_[1–8] (Page 197)
Authentication Password
Description Specifies the authentication password used to access the SIP server.
Value Range Max. 64 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference SIP_PASS_[1–8] (Page 198)
3.6.2.7 DNS
Enable DNS SRV lookup
Description Selects whether to request the DNS server to translate domain names
into IP addresses using the SRV record.
Value Range
• Yes
• No
Note
• If you select [Yes],
the unit will perform a DNS SRV lookup for
a SIP registrar server, SIP proxy server, SIP outbound proxy
server, or SIP presence server. If you select [No], the unit will
not perform a DNS SRV lookup for a SIP registrar server, SIP
proxy server, SIP outbound proxy server, or SIP presence
server.
Default Value Yes
Configuration File Reference SIP_DNSSRV_ENA_[1–8] (Page 205)
SRV lookup Prefix for UDP
Description Specifies a prefix to add to the domain name when performing a DNS
SRV lookup using UDP.
Note
• This setting is available only when [Enable DNS SRV
lookup] is set to [Yes].
Value Range Max. 32 characters
Default Value _sip._udp.
Configuration File Reference SIP_UDP_SRV_PREFIX_[1–8] (Page 206)
92 Administrator Guide Document Version 2013-02
3.6.2 SIP Settings [Line 1]–[Line 8]