Panasonic KX-TGP500 - Rtcp_Intvl_[1-8]; Max_Delay_[1-8]; Min_Delay_[1-8]

Default Value 0
Web User Interface Reference RTP Packet QoS (DSCP) (Page 98)
RTCP_INTVL_[1–8]
Parameter Name Example RTCP_INTVL_1, RTCP_INTVL_2, …, RTCP_INTVL_8
Value Format Integer
Description Specifies the interval, in seconds, between RTCP packets.
Value Range 0, 5–65535 (0: Disable)
Default Value 0
Web User Interface Reference RTCP Interval (Page 99)
MAX_DELAY_[1–8]
Parameter Name Example MAX_DELAY_1, MAX_DELAY_2, …, MAX_DELAY_8
Value Format Integer
Description Specifies the maximum delay, in 10-millisecond
units, of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than "NOM_DELAY"
– This value must be greater than "MIN_DELAY"
– "NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
Default Value 20
Web User Interface Reference Maximum Delay (Page 99)
MIN_DELAY_[1–8]
Parameter Name Example MIN_DELAY_1, MIN_DELAY_2, …, MIN_DELAY_8
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond
units, of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to
"NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Document Version 2013-02 Administrator Guide 189
4.6.2 RTP Settings