Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Web User Interface Reference Static IP Address (Page 67)
STATIC_SUBNET
Value Format String
Description Specifies the subnet mask for the unit.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Web User Interface Reference Subnet Mask (Page 68)
STATIC_GATEWAY
Value Format String
Description Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in a
configuration file.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring Settings from the Base Unit (KX-TGP55x only)/Handset
(Page 17)
Web User Interface Reference Default Gateway (Page 68)
USER_DNS1_ADDR
Value Format String
166 Administrator Guide Document Version 2013-02
4.4.1 IP Settings