Panasonic KX-TGP500 - Tone Timings; Stutter Tone; Tone Frequencies; Reorder Tone

Tone Timings
Description Specifies the pattern, in milliseconds, of ringback tones using 4 whole
numbers (on 1, off 1, on 2, off 2) separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 2000,4000,2000,4000
Configuration File Reference RINGING_TONE_TIMING (Page 181)
3.7.4.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify
that a voice mail is waiting, using 2 whole numbers separated by
a comma.
Value Range 0, 200–1000 (0: No tone)
Default Value 350,440
Configuration File Reference STT_TONE_FRQ (Page 181)
Tone Timings
Description Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a
voice mail is waiting, using 22 whole numbers (on 1, off 1, on 2, off 2,
…, on 11, off 11) separated by commas.
Value Range 0–5000 (0: Infinite time)
Default Value 100,100,100,100,100,100,100,100,100,100,100,100,100,
100,100,100,100,100,100,100,0,0
Configuration File Reference STT_TONE_TIMING (Page 182)
3.7.4.5 Reorder Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range 0, 200–1000 (0: No tone)
Default Value 480,620
Configuration File Reference REORDER_TONE_FRQ (Page 182)
120 Administrator Guide Document Version 2013-02
3.7.4 Tone Settings