Panasonic KX-TGP500 - Registering Units; Handset Registration and Management

To set Access Code
In cases when buttons/soft key icons are shown in English alphabet
1. Handset: [MENU] (center of joystick)
2. [ ]/[ ]: Select "IP Service" ® [SELECT]
3. [ ]/[ ]: Select "Call Features" ® [SELECT]
4. [
]/[ ]: Select "Settings" ® [SELECT]
5. [ ]/[ ]: Select "Code" ® [SELECT]
6. Enter the Access Code (16 characters max.).
7. [SAVE]
In cases when buttons/soft key icons are shown in symbols/pictures
1. Handset:
(center of joystick)
2. [ ]/[ ]: Select "IP Service" ®
3. [ ]/[ ]: Select "Call Features
" ®
4. [ ]/[ ]: Select "Settings" ®
5. [ ]/[ ]: Select "Code" ®
6. Enter the Access Code (16 characters max.).
7.
Notice
• After these parameters are set, phone will reboot automatically.
• The
handset has Alphabet (ABC) and Numeric (0-9) entry mode. When in these entry modes, you can
select which character is entered by pressing the right soft key (® see 2.1.7 HTTP Authentication
Settings).
42 Administrator Guide Document Version 2013-02
2.1.8 Access Code