325
12. Others
• When Red-Eye Removal ([ ] or [ ]) is performed, red parts may be corrected to black.
We recommend recording images with the flash mode set to [‰] or [Red-Eye Removal] set to
[OFF]. (P203)
• If no operations are performed during the set time period, [Auto LVF/Monitor Off] (P231) is
activated, and the Monitor/Viewfinder turns off.
• When an object or your hand is positioned near the eye sensor, the Monitor display may switch
to the Viewfinder display.
• This occurs when the shutter button is pressed halfway, or when the subject brightness
changes, making the lens aperture change.
This is not a malfunction.
• When the camera is connected to a PC or printer, it is not possible to switch to the viewfinder
display.
• Monitor/viewfinder of this unit adopts OLED. Screen burn-in may occur on the monitor/
viewfinder when a same image is displayed for a long period of time, but it does not affect the
recorded images.
– Change the on-screen images frequently by using [Economy] (P231), [Eye Sensor] function
(P42), or turning off the screen light (P49).
• This is a characteristic of this unit’s monitor, and this is not a malfunction.
• This is characteristic of the viewfinder of the camera and not a malfunction.
It does not affect the recorded images.
Red part of the recorded image has changed color to black.
Monitor/Viewfinder
The monitor/viewfinder turns off when the camera is turned on.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
Cannot switch between the monitor and viewfinder even when [LVF] is pressed.
Unevenly bright parts or irregular colours appear on the Monitor/Viewfinder.
Monitor appears to be coloured when you see it from an angle.
The coloring of the viewfinder differs from the actual tone.
To Next Page
Loading...
Need help?
General
