8. White Balance/Image Quality
218
Setting a Filter with Touch Operation
1
To u c h [ ].
2
Touch the item to set.
[ ]: Filter on/off
[ ]: Filter
[ ]: Filter effect adjustment
0 The default settings are for the Touch Tab to not be displayed.
Set [Touch Tab] to [ON] in [Touch Settings] in the [Custom] ([Operation])
menu. (l 425)
0 White balance will be fixed to [AWB] and the flash will be fixed to [Œ] (Forced
Flash Off).
0 The upper limit to ISO sensitivity is [6400].
0 When [High Dynamic] is set, the lower limit of the ISO sensitivity is fixed to
[400] and the higher limit to [6400].
The range of available ISO sensitivities is also different for [LOW] and [HIGH]
in [Dual Native ISO Setting].
– [LOW]: [AUTO] / [400] to [3200] (Base sensitivity: [400])
– [HIGH]: [AUTO] / [2500] to [6400] (Base sensitivity: [2500])
Reset the exposure if necessary when ISO sensitivity changes.
0 Depending on the filter, the recording screen may seem as if frames are
missed.
0 [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter]/[Sunshine]
are not available when using the following function:
– [ ] mode
0 When using Super 35 mm/APS-C lenses, [Toy Effect]/[Toy Pop] are not
available.
0 When [Image Area of Video] is [S35mm] or [PIXEL/PIXEL], recording video
with [Toy Effect]/[Toy Pop] is not possible.
0 [Filter Effect] is not available when using the following functions:
– [High Resolution Mode]
– [Multiple Exposure]
To Next Page
Loading...
