Panasonic Lumix S1H User Manual

16. Wi-Fi/Bluetooth
510

[WPS (PIN code)]
Enter a PIN code into the wireless access point to set up a connection.
1
On the camera screen, select the wireless access point you are
connecting to.
2
Enter the PIN code displayed on the camera screen into the wireless
access point.
3
Press or of the camera.

[From List]
Searches for a wireless access point to use, and connects to this.
1
Select the wireless access point you
are connecting to.
0
Press [DISP.] to run a wireless access point
search again.
0 If no wireless access point is found, refer to
“Connecting by Manual Input” on page 511.
2
(If network authentication is encrypted)
Enter the encryption key.
0
For information on how to enter characters, refer to page 464.
0 WPS is a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices.
For details about the operation and compatibility of WPS, refer to the
operating instructions for the wireless access point.
0 Confirm the encryption key of the wireless access point.

Panasonic Lumix S1H Specifications

General

Sensor Type	Full-frame CMOS
Resolution	24.2MP
ISO Range	100-51200 (expandable to 50-204800)
Viewfinder	5.76 million-dot OLED
Sensor Size	35.6 x 23.8 mm
Lens Mount	L-Mount
Video Recording	6K/24p, 5.9K/30p, 4K/60p
Image Stabilization	5-axis in-body image stabilization
LCD Screen	3.2-inch, 2.33 million-dot touchscreen
Autofocus System	Contrast-detect DFD AF, 225-area
Connectivity	Wi-Fi, Bluetooth
Battery Life	Approx. 400 shots (CIPA standard)
Continuous Shooting	9 fps
Internal Recording	10-bit 4:2:2
Shutter Speed	1/8000 to 60 sec
Video Frame Rates	24p, 30p, 60p
Storage Media	Dual SD card slots (UHS-II compatible)
Weather Sealing	Yes