18. Materials
568
0 This is the noise of the dust reduction function working (l 571); it is not a
malfunction.
0 This is the sound of the lens moving and aperture operation. It is not a malfunction.
0 In dark places, the red AF assist light (l 401) turns on to make it easier to focus on
a subject.
0 Reselect the language from the menu using the following procedure:
¨ [ ] ¨ [ ] ¨ [ ] ¨ Select desired language (l 455)
0 The camera surface and back of the monitor may become warm during use, but this
does not indicate a problem with performance or quality.
0 When the camera is left for a long time, the clock may reset.
Reset the clock. (l 56)
The camera makes a noise when it is turned on.
There is rattling noise from the lens when the camera is turned on or
off, or when the camera is swung.
There is a sound from the lens when recording.
A red light sometimes turns on when the shutter button is pressed
halfway.
An unreadable language was selected by mistake.
The camera becomes warm.
The clock is wrong.
To Next Page
Loading...
