Chapter 5 Operations — Using the web control function
248 - ENGLISH
[Network secure]
Perform the setting to protect the projector from an external attack or abuse via LAN.
Click [Network menu] → [Network secure].
1 [Command-protect]
Performs the setting regarding connection authentication when
using the command control function.
[Enable]:
Connects to the projector in protect mode.
Connection authentication is performed using the user name
and password of the administrator account.
[Disable]:
Connects to the projector in non-protect mode.
Connection authentication is not performed.
2 [Save]
Update the setting.
Note
f When [Command-protect] is set to [Disable], the projector becomes vulnerable against a threat on the network because connection
authentication will not be performed. Use this function by understanding the risk.
f For details on how to use the command control function, refer to “Control commands via LAN” (x page 284).
To Next Page