EasyManua.ls Logo

Panterra Fusion - Front Lamp Adjustment; Clutch Engagement; Front Suspension; Rear Suspension

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Scheduled Maintenance
3-10
42
NIKOTA USA: PANTERRA SCOOTER SERVICE MANUAL
CHAPTER 3: BODY COVER AND EXHAUST SYSTEM
Front Lamp Adjustment
1. Rotate nut to adjust free gap when it
exceeds proper adjustment.
2. Turn main switch to “on” and start
engine.
3. Rotate adjusting screw of front lamp
to aim the light.
Clutch Engagement
1. Start engine and increase RPM slowly
to check performance of clutch.
•Clutch should engage at 2200
RPM.
•Service and replace clutch as
necessary should slippage occur.
Front Suspension
1. Pull front brake bar tightly and
compress front for up and down to check
its performance.
2. Check for leakage of front for and/or
soft springs.
Rear Suspension
1. Compress rear shocks up and down
to check performance.
2. Check for leakage of rear shock or
soft springs.
3. Suspend rear wheel and push it left
and right to check engine suspension
sleeve for wear.
1
ADJUSTMENT SCREW
UNDERSIDE OF COVER
2
1

Table of Contents

Related product manuals