Parker P Series - Page 232

Parker Hannifin
P Series User Guide 230
Set the function of I/O connector’s digital input signal 12 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation
0x220C Digital Input Signal 13 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0016 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 13 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation.
0x220D Digital Input Signal 14 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0017 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 14 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation.
0x220E Digital Input Signal 15 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0018 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 15 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation.
0x220F Digital Input Signal 16 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0019 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 16 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation.
0x2210 Digital Output Signal 1 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT
0 to 0xFFFF
0x8002
-
RW
No
Power
Yes
www.comoso.com