Parker P Series - Page 231

Parker Hannifin
P Series User Guide 229
Resupply
Set the function of I/O connector’s digital input signal 7 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation.
0x2207 Digital Input Signal 8 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0011 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 8 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation
0x2208 Digital Input Signal 9 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0003 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 9 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation
0x2209 Digital Input Signal 10 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0013 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 10 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation
0x220A Digital Input Signal 11 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0014 - RW No
Power
Resupply
Yes
Set the function of I/O connector’s digital input signal 11 and input signal level.
Please see the descriptions 0x2200 for more detailed explanation
0x220B Digital Input Signal 12 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0015 - RW No
Power
Resupply
Yes
www.comoso.com