Parker P Series - Page 234

Parker Hannifin
P Series User Guide 232
0x2213 Digital Output Signal 4 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0005 - RW No
Power
Resupply
Yes
Allocates the function of I/O connector’s digital output signal 4, and sets the output
signal level. See the descriptions on 0x2210 for more detailed explanation.
0x2214 Digital Output Signal 5 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0010 - RW No
Power
Resupply
Yes
Allocates the function of I/O connector’s digital output signal 5, and sets the output
signal level. See the descriptions on 0x2210 for more detailed explanation.
0x2215 Digital Output Signal 6 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0011 - RW No
Power
Resupply
Yes
Allocates the function of I/O connector’s digital output signal 6, and sets the output
signal level. See the descriptions on 0x2210 for more detailed explanation.
0x2216 Digital Output Signal 7 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x000A - RW No
Power
Resupply
Yes
Allocates the function of I/O connector’s digital output signal 7, and sets the output
signal level. See the descriptions on 0x2210 for more detailed explanation.
0x2217 Digital Output Signal 8 Selection ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 0xFFFF 0x0006 - RW No
Power
Resupply
Yes
Allocates the function of I/O connector’s digital output signal 8, and sets the output
signal level. See the descriptions on 0x2210 for more detailed explanation.
www.comoso.com