Parker Hannifin
P Series User Guide 240
0x230B
Program Jog Operation Time 4 ALL
e
Setting Range
Default
Value
Unit
Acces
sibility
Allocati
Change
Property
Stor
e
UINT 0 to 10000 5000 ms RW No
Yes
Please see descriptions on speed 1(0x2304).
0x230C
Index Pulse Search Speed ALL
e
Setting Range
Default
Value
Unit
Acces
sibility
Allocati
Change
Property
Stor
e
Set the index pulse search speed.
0x230D
Speed Limit Function Select ALL
e
Setting Range
Default
Value
Unit
Acces
sibility
Allocati
Change
Property
Stor
e
Set the speed limit function for torque control.
Set Value Setting Details
0 Limited to the limit speed value (0x230E)
1 Limited to the motor’s maximum speed
0x230E
Speed Limit Value at Torque Control Mode ALL
e
Setting Range
Default
Value
Unit
Acces
sibility
Allocati
Change
Property
Stor
e
UINT 0 to 6000 1000 rpm RW Yes
Yes
Set the limit speed value for torque control. It only applies when the speed limit function
setting (0x230D) is set to 0.
0x230F
Over Speed Detection Level ALL
e
Setting Range
Default
Value
Unit
Acces
sibility
Allocati
Change
Property
Stor
e
UINT 0 to 10000 6000 rpm RW No
Yes
Sets the detection level for the excessive speed alarm (AL-50).When the set value is
higher than the motor’s maximum speed, the detection level is determined by the
motor’s maximum speed