Parker P Series User Manual

Parker Hannifin
P Series User Guide 259
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
STRIN
G
- - - RO No - No
Show up to 16 servo alarms that occurred up to 16. SubIndex 1 is the most recent
alarm, and the 16 is the oldest alarm. The servo history can be reset through
procedure command.
 Third Party Motor Support(0x2800~ )
We provide you with the following motor parameters to drive third party motors using
this drive. Motor can be activated only when the appropriate parameter is input.
Regarding this, this company did not perform any test on combination of this drive and
any other third party motor. And we offer no guarantee on the characteristics of such
motors.
0x2800 [Third Party Motor] Type ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT 0 to 1 0 - RW No
Power
Resupply
Yes
Set motor type.
Set Value
Setting Details
0
Rotary motor
1
Linear motor
0x2801 3
rd
party [Third Party Motor]Number of Poles ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
UINT
2 to 1000
8
-
RW
No
-
Yes
Set the number of poles. Please set the value to 2 when using a linear motor.
0x2802 [Third Party Motor]Rated Current ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
FP32
-
2.89
Arms
RW
No
-
Yes
Sets the motor’s rated current.
0x2803 [Third Party Motor]Maximum Current ALL
Variabl
e
Format
Setting Range
Default
Value
Unit
Acces
sibility
PDO
Allocati
on
Change
Property
Stor
e
www.comoso.com

Parker P Series Specifications

General

Brand	Parker
Model	P Series
Category	Servo Drives
Language	English