1
Workshop Manual, TSD3450E, Issue 1 3
2800
l Always use a safety cage to protect the operator when a component is to be pressure tested in a container
of water. Fit safety wires to secure the plugs which seal the hose connections of a component which is to
be pressure tested.
l Do not allow compressed air to contact your skin. If compressed air enters your skin, obtain medical help
immediately.
l Turbochargers operate at high speed and at high temperatures. Keep fingers, tools and debris away from
the inlet and outlet ports of the turbocharger and prevent contact with hot surfaces.
l Some components are not waterproof and should not be washed with a high-pressure water jet or steam.
l Fit only genuine Perkins parts.
To Next Page
Loading...
