Perkins 2800 - Operation 3-3 to Dismantle and to Assemble

3
30 Workshop Manual, TSD3450E, Issue 1
2800
To dismantle and to assemble Operation 3-3
To dismantle
Note: Check the condition of all components and renew any which are worn or damaged.
1 Slide the valve rocker levers (A3) and the unit injector rocker levers (A4) from the shaft (A7).
Note: Fit a new ‘O’ ring seal to any rocker lever adjuster if its button (A1) has been removed from the
adjustment screw (A2).
2 Remove the button (A1) from the adjustment screw (A2) in the valve rocker lever (A3).
3 Remove the button (A6) from the adjustment screw (A5) in the unit injector rocker lever (A4).
4 Repeat steps 1 to 3 for the rocker lever assemblies which remain.