Perkins 2800 - Front Engine Support

7
82 Workshop Manual, TSD3450E, Issue 1
2800
Front engine support
To remove and to fit Operation 7-1
To remove
1 Remove the radiator, Operation 12-4.
2 Use a suitable hoist, attached to the front lifting bracket, to support the engine and remove the bolts (A2).
which retain the front mounting support (A3) to the base frame.
3 Remove the eight bolts and washers (A1) and remove the engine support.
To fit
1 Fit the front engine support to the engine and retain with eight bolts and washers (A1).
2 Attach the engine support to the base frame with the relevant bolts (A2), remove the hoist from the lifting
bracket and tighten the bolts.
3 Fit the radiator, Operation 12-4.