3–25
w WARNING
• For rear seat that equipped with
headrest, always connect the
top-tether anchor after adjusting
the headrest to its most upward
position when installing a child
restraint system. If it still interfere
with the child seat or top strap,
remove the headrest and keep it
at a safe place.
Top strap
Top strap
• If the headrest is kept in a lowered
position, it may interfere with the
top strap causing it to become
slack. This may allow the child seat
to move in an emergency situation
such as a collision causing serious
injury.
w WARNING
• Once the seat position has been set,
do not change it. If you encounter
an accident, you may be seriously
injured.
• For installation and removal
of your child restraint system,
read carefully and follow the
installation manual provided by
the manufacturer.
• When installing a child restraint
system, ensure there are no foreign
objects placed around the ISO FIX
compliant child restraint system
fixing bars or top-tether anchors,
and there are no objects such as
seat belts caught in the mechanism.
If seat belts or foreign objects do get
caught, the child restraint system
may not be properly secured,
causing serious injury in the case
of a collision.
• If the child restraint system is left
in the car unrestrained, it may hit
objects or occupants causing an
accident when hard braking.
Sect 03_EN D42L.indd 25 24/10/2019 4:25 PM
To Next Page
Loading...
