3–24
w WARNING
• Make sure the top strap is securely
latched, and check that the child
restraint system is secured
by pushing and pulling it in
every directions. Follow all the
installation instructions provided
by its manufacturer.
• Do not attach the top strap to
anything other than the correct
top-tether anchor point.
Rear seat
This vehicle is equipped with ISO FIX
compliant child restraint system fixing bars
and top-tether anchors that allow you to install
compatible child restraint systems.
For these ISO FIX compliant child restraint
system fixing bars and top-tether anchors,
only install a child restraint system that
conforms to the specific road vehicle safety
standards for this car. (Perodua genuine
ISO FIX compliant child restraint system
fixing bar and top-tether anchors supported
child restraint system). For more information,
please consult your authorised Perodua
Service Centre.
NOTE
The installation method is different from
child or infant seat types that are supported
by the seat belts.
* ISO - International Organization for
Standardization
ISO* FIX Child restraint system
Fixing bars
ISOFIX
To Install
1. Widen the gap between the seat cushion
and seatback slightly and confirm the
location of the ISO FIX compliant child
restraint system fixing bars or top-tether
anchors.
2. Move the front seats forward if necessary.
3. Connect the fixtures of the appropriate
child restraint system to the ISO FIX
compliant child restraint system fixing
bars or top-tether anchors. (For the
installation method, please read the
installation manual provided by the child
restraint system manufacturer).
4. Gently move the child restraint system to
confirm that it has been installed correctly.
Sect 03_EN D42L.indd 24 24/10/2019 4:25 PM
To Next Page
Loading...
