4–3
The switch indicator on the button (engine
switch) will illuminate or flashes in green colour
depending on the switch mode.
Automatic Transmission
1. Move the shift lever into P or N range.
2. Depress the brake pedal.
3. When the indicator of the engine switch
turns green, push the engine switch.
NOTE
• Make sure to carry the smart key with
you inside the vehicle.
• Before starting the engine, ensure you
are seated properly with the seat belt
fastened.
(See “Correct driving posture” in
Section 3)
Engine start/stop button To start engine
R
L
MIRROR
ENGINE
START
STOP
OFF
OFF
OFF
A
Switch indicator
Automatic Transmission
R
L
MIRROR
ENGINE
START
STOP
OFF
OFF
OFF
A
Automatic transmission
Without depressing the brake pedal, the
engine switch mode can be changed to
“OFF”, “ACC” or “ON” each time the engine
switch is pushed.
NOTE
For automatic transmission, the engine
switch mode cannot be changed to “OFF”
if the shift lever is not in P range.
To switch engine switch mode
OFF ACC ON
Not in P range
In P range
Automatic Transmission
Sect 04_EN D42L.indd 3 24/10/2019 4:25 PM
To Next Page
Loading...
