4–4
If the battery of the smart key is weak or
the communication between smart key and
the vehicle is interfered, engine cannot be
started normally. Follow the steps below to
start the engine.
1. Move the shift lever into P range.
2. Continue to depress the brake pedal.
3. Touch the smart key with the engine switch
until the buzzer sounds and the engine
switch indicator turns green.
4. Push the engine switch within 4 seconds
after the buzzer sounds and the engine
switch indicator turns green.
Automatic transmission
1. Stop the vehicle completely.
2. Move the shift lever into P range.
3. Apply parking brake.
4. Push the engine switch.
5. When you remove your foot from the
brake pedal, make sure the engine switch
indicator light is off.
To stop engine
R
L
MIRROR
ENGINE
START
STOP
OFF
OFF
OFF
A
• During steering lock (engine switch is
“OFF”), the steering can be unlocked when
the engine switch is turned to “ACC”.
• When you open and close the driver’s
door after the engine switch is “OFF”, the
steering is locked. When you operate the
engine switch, steering lock is released
automatically.
• If the driver’s door is open when the engine
switch is turned to “OFF” and steering is
not locked, the buzzer will sound. Close
the driver’s door and check the steering
lock is locked.
NOTE
If the engine switch indicator continuously
blink fast in green colour for 30 seconds,
steering lock cannot be unlocked.
In this case, push the engine switch again
after turning the steering wheel.
Steering lock
Sect 04_EN D42L.indd 4 24/10/2019 4:25 PM
To Next Page
Loading...
