7–9
• If the connected USB devices is not
supported, “ERROR 2” is displayed.
• If the over-current is detected from
connected USB, “OVERCURR” is
displayed.
• This unit can show tags (version 1.x and
2.x) for MP3 and WMA files.
• This unit can play back MP3/WMA files
meeting the conditions below:
- File: MPEG 1, 2 and 2.5 - Layer 3 (MP3);
Windows Media Audio v7/8/9 (WMA).
- Bit rates: 8kbps - 320kbps (MP3);
48kbps -192kbs (WMA).
- Sampling Frequency: 8kHz - 48kHz
(MP3); 8kHz - 44.1kHz (WMA)
• This unit can play back VBR (variable
bit rate) files but will have play time
inaccuracies during fast backward and
fast forward.
• To play good quality music from MP3/
WMA, the file bit rates must be set at
128kbps or above and the converting
source should be from original CD format.
• This unit can display up to 28 characters
for title name, artist name, album name,
file name and folder name.
• This unit can recognize a total of 65025
files from USB memory. This unit can read
up to 255 files in each folder, up to a total
of 255 folders.
Display Button (DISP) - 7
This allows the unit to change the MP3/WMA
display information on LCD. Press the DISP
button 7 to select the MP3/WMA display
information with the following sequence:
Track No + Play Time File Name Folder Name
Title Name Artist Name Album Name
Folder down button ( F-DN ) - 8
When F-DN button 8 is pressed, the folder
will be selected by downward sequence.
Folder up button ( F-UP ) - 9
When F-UP button 9 is pressed, the folder
will be selected by upward sequence.
Notes on playing MP3/WMA from USB
memory
• This unit unable to play back certain
USB devices or certain files due to their
characteristics or recording conditions.
• Depending on the shape of the USB
devices and connection ports, some USB
devices may not be attached properly or
the connection might be loose.
Sect 07_EN D42L.indd 9 25/10/2019 11:45 AM
To Next Page
Loading...
