7–15
Error Displays
Error Display Cause Measure
USB Devices
ERROR 2
The connected USB device is not
supported.
If the USB device freezes, disconnect it, and reconnect it again.
Connect a proper USB device.
NO FILE No MP3/WMA files. Connect USB device that has MP3/WMA files.
OVERCURR Over-current or data error is detected.
Turn off the ignition switch, disconnect the device, restart the engine and reconnect
it again. If the device still not reconized, try replacing with a different device.
Sect 07_EN D42L.indd 15 25/10/2019 11:45 AM
To Next Page
Loading...
