11–11
CAUTION
Never apply a jack to the rear suspension
beam.
Rear suspension
beam
4. Remove the wheel hub nuts and replace
the flat tyre with a spare tyre or new tyre.
w WARNING
• Lay the removed flat tyre so that it
may not fall down accidentally.
• We recommend wearing gloves.
The flat tyre may still be hot.
Wheel contact surface
• Remove any corrosion and objects
on the brake drum and disk, and
the wheel hub nut surface with a
rag before putting on the spare
tyre. Installation of wheels without
secure metal-to-metal contact at
the mounting surface may cause
vehicle vibration and the wheel hub
nuts to loosen while driving.
Sect 11_EN D42L.indd 11 25/10/2019 11:59 AM
To Next Page
Loading...
