11–13
8. Check the air pressure of the replaced
tyre and adjust it as specified.
Tighten the air valve cap.
9. Store all tools, jack, jack handle, and flat
tyre securely.
Valve
w WARNING
If you notice any vibration or abnormal
noise after changing a wheel, have
them checked by an authorised
Perodua Service Centre immediately.
NOTE
Abnormal noise may happen at flat tyre
when passing through a rough road
condition.
Caution about aluminium wheel
• Aluminium wheels can be scratched or
damaged easily. Handle them carefully to
maintain their appearance, performance
and safety.
• After driving the first 1,000 km, ensure
that the wheel nuts are tight.
• If you have rotated, repaired or changed
the tyres, ensure that the wheel nuts are
still tight after driving 1,000 km.
• Use only the Perodua wheel nuts designed
for your aluminium wheels.
• When installing balance weight on
aluminium wheels, use only a plastic or
rubber hammer.
• Periodically check the aluminum wheels
for damage. If any damage is found,
replace the damaged aluminium wheel
immediately.
• When using a spare wheel unit, do not
fix the aluminium wheel into spare tyre
storage location with the attaching bolt. It
may damage the bolt screw or aluminium
wheel.
Sect 11_EN D42L.indd 13 25/10/2019 11:59 AM
To Next Page
Loading...
