14–4
Electric engine cooling fan
w WARNING
• Turn the ignition switch to “LOCK”
or “OFF” when you work near the
radiator and condenser fans, or
radiator grill.
• Do not touch or come close to
the fan blades if you service your
vehicle with the ignition turned
“ON”. The radiator fan switch is
activated automatically when
the coolant temperature reaches
a certain level Furthermore, the
radiator fan will automatically start
to rotate with the air conditioner on.
Appropriate Range
Appropriate Range
Oil Level Gauge
Marks
Marks
1NR-VE Engine
1KR-VE Engine
Engine oil
Engine oil level check
1. Park the vehicle on a level surface.
2. Warm up the engine to operating
temperature and stop it.
3. After a few minutes, slowly pull the dipstick
out and wipe the oil clean.
4. Reinsert the dipstick as far as it will go.
5. Pull out the dipstick again and check the
oil level if it is between two marks.
6. If the engine oil level is too low, add the
engine oil. For recommended engine oil,
see Section 17.
w WARNING
Clean any spilt oil. It may cause a fire
if it is left on a hot component.
NOTE
Check the engine oil level according to
maintenance schedule periodically. In
addition, always check the engine oil level
before driving for long distance.
Sect 14_EN D42L.indd 4 31/10/2019 5:38 PM
To Next Page
Loading...
