14–21
To remove fuse
1. Remove the fuse puller from the relay and
fuse box cover.
Fuse Puller
2. With the fuse puller, pinch the fuse and
remove it.
Fuse Puller
3. Check the removed fuse. If the fuse has
been blown out, replace it with a spare
fuse. If the fuse has not been blown out,
most likely there is another cause. Have
your vehicle checked by an authorised
Perodua Service Centre.
If repairing process is delayed, disconnect
the cable from the negative terminal of the
battery as a precautionary measure.
CAUTION
• Do not use fuse other than the specified
capacities. The wiring might overheat
and cause damaged. This could cause
a fire and it is dangerous.
Good Blown
Sect 14_EN D42L.indd 21 31/10/2019 5:38 PM
To Next Page
Loading...
