14–29
New wiper blade
3. Slide the wiper blade along the arm to
release it from the hook.
4. Install the new wiper blade by sliding it
into the same end where the old wiper
was pulled out.
5. Make sure the hook snaps into place to
secure it.
CAUTION
• To prevent damage to the wiper arm,
raise the driver‘s side first, then the
passenger‘s side. Conversely, when
setting down the wiper arms, set the
passenger’s side down first.
• Do not open the hood when the wiper
arms are raised. This could damage the
hood and the wiper arms.
• Be careful not to allow the wiper
arm to fall against the windshield. It
could crack the windshield. Protect
your windshield with a folded towel if
necessary.
Sect 14_EN D42L.indd 29 31/10/2019 5:38 PM
To Next Page
Loading...
