Operating Manual DTT 6801 Multicontroller (MC) 086100037 © Pfannenberg GmbH Page 15 / 49
2.5 Type plate
Danger due to damage of units
Disregard of type plate specifications can result in severe accidents.
Always observe the specifications on the type plate when installing and maintaining the units.
The type plate is located on the rear side of the cooling unit housing.
The figure shows the standard version for EU Member States. The type plate version may differ in other
countries.
Exterior / interior ambient conditions
Nominal current (UL 60 HZ)
Figure 16 - Type plate for EU Member States