Pharma Test PT-Node - Technical Specifications; Standard Supply Scope; Available Connecting Cables; Table 2: Technical Data

Pharma Test Apparatebau AG
Operating Manual
B-24-00100_PT-NODE_v1.0e.docx Page 9 of 64
Section 1.1 Technical Specifications
Parameter
Specification
Display
OLED screen shows network status, IP address, connected
instruments and date & time
Configuration
Web-interface through web browser
Data storage
Internal SD card
Interfaces
2 x RS-232 serial port to connect up to two Pharma Test
instruments, 1 x LAN port or Wi-Fi to connect to network
Printer support
Printing via web browser on any local or network printer
Data access
FTP server connection
Power
100-240 Volt AC, 50/60 Hz
CE / EMC certification
All CE / EMC Certification provided
Validation
All IQ & OQ documents included
Table 2: Technical Data
Section 1.2 Standard Supply Scope
Part-No.
No.
Description
240-0210
1
Wall plug, 12V/DC, 2000mA, 24W, with international adapters
34-01123
1
Patch cable, RJ45, approx. 1.0m
Table 3: Supply Scope
Section 1.3 Available Connecting Cables
Part-No.
Description
34-00311
Connecting cable for PTB 111E, PTB 311E, PTB 511E and PTBA 211E
instruments
34-01203
Connecting cable for PTWS 120D, PTWS 120S, PTWS 820, PTWS 620, PTWS
1220, PTWS D620 and PTWS 1420 instruments
34-01205
Connecting cable for PT-TD300, PTF 100, PTF 200, PTF 300, PTF 600, PTZ
100 and PTZ 300 instruments
Table 4: Available connecting cables