What causes 'Protective Time out at Rew test' in Physio Control Medical Equipment?
If your Physio Control Medical Equipment shows 'Protective Time out at Rew test', it could be due to motor connections, the Protective POT signal, or a locked compression module. Check the motor, the Protective POT, and look for Protective errors.
What to do if my Physio Control Medical Equipment 'Control Time out at move to top'?
If your Physio Control Medical Equipment experiences a 'Control Time out at move to top', it could be due to motor and HALL connections or a locked compression module. Check the motor and the compression module.
What does it mean if 'Protective 5V < 4.5V or > 5.5V' on Physio Control Medical Equipment?
If your Physio Control Medical Equipment displays 'Protective 5V < 4.5V or > 5.5V', it indicates a problem with the cable between the boards, an incorrect Protective 5V, or internal reference faults. Check the cable, Protective 5V, and Control internal voltage faults. Consider replacing the Protective board.
What to do if 'Control 5V < 4.5V or > 5.5V' on Physio Control Medical Equipment?
If your Physio Control Medical Equipment shows 'Control 5V < 4.5V or > 5.5V', it indicates an electrical fault or a Control board pin connected to the back plate. Replace the Control board.
What to do if 'Control 24V < 18V or > 35V' on Physio Control Medical Equipment?
If your Physio Control Medical Equipment displays 'Control 24V < 18V or > 35V', it is likely due to a battery fault or internal reference faults. Check for charger errors or other Control internal voltage faults.
What causes 'Control 2.5V Ref < 2V or > 3V' on Physio Control Medical Equipment?
If your Physio Control Medical Equipment displays 'Control 2.5V Ref < 2V or > 3V', it indicates an electrical fault, a Control board pin connected to the back plate, or a POT +2.5V shortcut. Check the POT or replace the Control board.
What to do if my Physio Control Medical Equipment indicates 'To High internal board temp. > 85°C if Error > 70°C if Warning'?
If your Physio Control Medical Equipment indicates 'To High internal board temp. > 85°C if Error > 70°C if Warning', the fan might be disconnected or jammed, or there could be a broken temperature sensor or internal reference faults. Check the fan and consider replacing the Control PCB.
What causes 'Access of vital function Code fault' on Physio Control Medical Equipment?
If your Physio Control Medical Equipment reports an 'Access of vital function Code fault', it indicates a halted or disturbed Control CPU. Replace the Control board.
What does 'Control Potentiometer linearity fault' mean on Physio Control Medical Equipment and how to fix it?
A 'Control Potentiometer linearity fault' on your Physio Control Medical Equipment means the Control potentiometer is too un-linear or was influenced during calibration. Repeat the calibration or replace the compression module.
What does 'Protective Potentiometer linearity fault' mean on Physio Control Medical Equipment and how to fix it?
A 'Protective Potentiometer linearity fault' on your Physio Control Medical Equipment means the Protective potentiometer is too un-linear or was influenced during calibration. Repeat the calibration or replace the compression module.
Defines the coverage and applicability of the service manual.
Lists the necessary qualifications and training for service technicians.
States limitations of liability for product misuse or consequential damages.
Procedure for reporting any failures affecting patient or user safety.
Identifies the trademark holder for LUCAS®2.
References other relevant documents for additional information.
Details on reporting service actions and tracking device modules.
Guidelines for proper recycling of device materials.
Identifies who is responsible for the accuracy of manual content.
Specifies the device's purpose and limitations for performing chest compressions.
Precautions to take when working with electrical components.
Safety measures related to battery chemicals and leakage.
Guidelines for protecting against electrostatic discharge when handling electronics.
Details on battery, PCBs, user panel, and cooling fan.
Explains how the device generates chest compressions.
Lists and illustrates all physical parts of the LUCAS® 2 system.
Steps for installing the program loader software and drivers.
Procedure to establish a connection between the LUCAS device and the computer.
Instructions for operating the software interface and understanding its display.
Procedures for updating the software on the LUCAS device.
Addresses issues and solutions for calibration errors encountered during software use.
Information on how to verify installed program versions using checksums.
Procedure to modify the device's unique identification number.
Instructions for synchronizing the device's internal clock.
Functionality for saving and printing status views from the software.
Interpreting visual and audible signals during normal device operation.
Details on device malfunction alarms, their causes, and results.
Lists and explains error codes from the Control, Protective, and Charger CPUs.
Specific error codes originating from the Control CPU and their probable causes.
Specific error codes originating from the Protective CPU and their probable causes.
Specific error codes originating from the Charger CPU and their probable causes.
General advice and common checks for diagnosing device issues.
Detailed list of spare parts available for servicing the LUCAS device.
List of additional spare parts that can be ordered for the device.
List of accessories compatible with the LUCAS device.
List of common tools needed for performing maintenance and repairs.
List of specific tools recommended for LUCAS service.
Lists lubricants, fluids, and other substances required for maintenance.
Lists the software programs required for device maintenance and diagnostics.
Step-by-step guide for performing annual maintenance on the LUCAS device.
Instructions for cleaning the electric fan and mesh grill.
Procedure for lubricating the compression module's carry ball screw.
Instructions for lubricating the claw lock mechanism.
Procedure for removing and installing the hood and its bracket.
Instructions for replacing the bellows component of the device.
Procedure for replacing the main compression unit.
Instructions for replacing the drive belt.
Procedure for replacing the electric motor.
Procedure for replacing the main control board.
Procedure for replacing the protective control board.
Procedure for replacing the electric fan.
Procedure for replacing a support leg.
Procedure for replacing the battery connector board.
Procedure for replacing the power inlet.
Procedure for replacing the main body or frame assembly.
Overview of the process to verify device functions after repair or maintenance.
Tests to verify the proper mechanical operation of the device.
Detailed checks for the piston and claw lock mechanisms.
Tests to verify the proper electronic functions and indicators of the device.
General| Brand | Physio Control |
|---|---|
| Model | lucas 2 |
| Category | Medical Equipment |
| Language | English |
To Next Page
