Pioneer XV-EV21 - CD Recording and AM Tape Improvement; CD Recording using ASES; Improving AM Tape Recordings

Using the tape deck08
58
En
1 Prepare the tape deck for recording.
Load a blank cassette and switch Dolby NR
on or off as required. Recording starts in the
3 (forward) direction, so take care which
way you load the tape.
2 Load the CD you want to record.
3 Press the DVD/CD button, then press
7 (STOP).
The CD should now be selected, but not
playing.
If you want to record the tracks in a different
order, or record only one track, use the
program play feature—see pages 43–47 for
how to make a program list. Make sure
playback is stopped before going to the next
step.
4 Press ASES to start recording.
The ASES indicator lights, followed by a 4
second pause while the tape winds past the
leader, then recording starts.
Recording finishes automatically when the
end of the disc is reached, or the tape ends
(whichever comes first).
5 If you want to stop recording before
the end of the CD, press 7 (STOP).
• ASES may not work correctly if the first
side of the tape finishes at the same
time as a track ends. If this happens,
stop the recording then resume on the
other side without ASES.
• You can’t make ASES tape recordings of
Video CDs or DVD-Video discs.
Improving AM tape recordings
• Default setting:B.CUT 1
Recording AM broadcasts on cassette tape
can result in noisy recordings. If you
experience this, change the beat cut mode.
1 Switch the system into standby.
2 Press ENTER.
3 Use the
/
buttons to select the
beat cut (BEAT CUT) display.
On the front panel use 4/1 and
¡/¢.
4 Press ENTER.
The current setting is shown in the display.
5 Use the
/
buttons to select B.CUT 1
or B.CUT 2.
On the front panel use 4/1 and
¡/¢.
6 Press ENTER to confirm.
B.CUT lights in the display when B.CUT 2 is
selected.