Pioneer XV-EV21 - 11 Adjusting the Sound; Adjusting Bass and Treble; Adjusting Audio Balance; Creating Wider Stereo Sound

Adjusting the sound
11
65
En
Adjusting the bass and treble
To help you get the sound you want you can
increase or reduce the bass and treble.
• Default setting: BASS+1 (EV51DVD)
BASS+2 (EV21DVD)
1 Press SOUND MODE repeatedly to
select BASS or TREBLE.
You can also use the
/
(cursor left/right)
buttons on the remote to select a menu item
after you’ve pressed SOUND MODE.
2 Use
/
(remote) or 4/1 and
¡/¢ (front panel) to adjust the sound.
The bass and treble can be adjusted from -4
to +4.
3 Press ENTER.
Adjusting the balance
EV21DVD model only
To help you get the sound you want you can
change the left/right balance.
1 Press SOUND MODE repeatedly to
select CENTER, LEFT or RIGHT.
You can also use the
/
(cursor left/right)
buttons on the remote to select CENTER,
LEFT or RIGHT after you’ve pressed SOUND
MODE.
2 Use
/
(remote) or 4/1 and
¡/¢ (front panel) to adjust the
balance.
The balance can be adjusted from Left 10 to
Right 10.
3 Press ENTER.
Creating wider stereo sound
EV21DVD model only
The Stereo Wide feature makes the stereo
spread appear wider than it really is—useful
when the speakers are close together.
1 Press SOUND MODE repeatedly to
select ST-W ON or ST-W OFF.
You can also use the
/
(cursor left/right)
buttons on the remote to select a menu item
after you’ve pressed SOUND MODE.
2 Use
/
(remote) or 4/1 and
¡/¢ (front panel) to select ST-W ON
or OFF.
3 Press ENTER.
Saving your sound
preferences
EV21DVD model only
If you have certain preferences for the bass,
treble and stereo-wide controls, you can
store these as a preset for easy recall.
1 Make sure the stereo-wide and tone
controls are the way you want them,
then press and hold ENTER for three
seconds.
USER 1 or USER 2 will blink in the display.
2 Use
/
(remote) or 4/1 and
¡/¢ (front panel) to select USER 1 or
USER 2.
3 Press ENTER.