User’s Manual of GS-5220 LCD Series
114
4.2.6 NTP Configuration
Configure NTP on this page. NTP is an acronym for Network Time Protocol, a network protocol for synchronizing
the clocks of computer systems. NTP uses UDP (data grams) as transport layer. You can specify NTP Servers. The
NTP Configuration screen in Figure 4-2-8 appears.
Figure 4-2-8: NTP Configuration Page Screenshot
The page includes the following fields:
Object Description
• Mode
Indicates the NTP mode operation. Possible modes are:
Enabled: Enable NTP mode operation. When enabling NTP mode
operation, the agent forward and transfer NTP messages between
the clients and the server when they are not on the same subnet
domain.
Disabled: Disable NTP mode operation.
• Server #
Provide the NTP IPv4 or IPv6 address of this switch. IPv6 address is in
128-bit records represented as eight fields of up to four hexadecimal
digits with a colon separating each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special
syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros, but it can only appear once. It also
uses a legal IPv4 address like '::192.1.2.34'.
To Next Page
Loading...
Need help?
General