User’s Manual of GS-5220 LCD Series
89
115200 bps
8 data bits
No parity
1 stop bit
Figure 3-1-2: Terminal Parameter Settings
You can change these settings, if desired, after you log on. This management method is often preferred because
you can remain connected and monitor the system during system reboots. Also, certain error messages are sent
to the serial port, regardless of the interface through which the associated action was initiated. A Macintosh or
PC attachment can use any terminal-emulation program for connecting to the terminal serial port. A workstation
attachment under UNIX can use an emulator such as TIP.
3.4 Web Management
The Managed Switch offers management features that allow users to manage the Managed Switch from
anywhere on the network through a standard browser such as Microsoft Internet Explorer. After you set up your
IP address for the switch, you can access the Managed Switch's Web interface applications directly in your Web
browser by entering the IP address of the Managed Switch.
To Next Page
Loading...
Need help?
General