User’s Manual of GS-5220 LCD Series
321
4.9.13 Storm Control Configuration
Storm control for the switch is configured on this page. There is a unicast storm rate control, multicast storm
rate control, and a broadcast storm rate control. These only affect flooded frames, i.e. frames with a (VLAN ID,
DMAC) pair not present on the MAC Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the
switch.
The Storm Control Configuration screen in Figure 4-9-15 appears.
Figure 4-9-15: Storm Control Configuration Page Screenshot
The page includes the following fields:
Object Description
• Port
The port number for which the configuration below applies.
To Next Page
Loading...
Need help?
General