User’s Manual of GS-5220 LCD Series
412
Round-Trip
Time
radiusAccClientExt
RoundTripTime
The time interval (measured in
milliseconds) between the most
recent Response and the Request
that matched it from the RADIUS
accounting server. The granularity of
this measurement is 100 ms. A value
of 0 ms indicates that there hasn't
been round-trip communication with
the server yet.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
: Click to refresh the page immediately.
: Clears the counters for the selected server. The "Pending Requests" counter will not be cleared by
this operation.
4.11.10 Windows Platform RADIUS Server Configuration
Setup the RADIUS server and assign the client IP address to the Managed switch. In this case, field in the
default IP Address of the Managed Switch with 192.168.0.100. And also make sure the shared secret key is as
same as the one you had set at the Managed Switch’s 802.1x system configuration – 12345678 at this case.
1. Configure the IP Address of remote RADIUS server and secret key.
To Next Page
Loading...
Need help?
General