User’s Manual of GS-5220 LCD Series
411
State - Shows the state of the server. It takes
one of the following values:
Disabled: The selected server is
disabled.
Not Ready: The server is enabled,
but IP communication is not yet up
and running.
Ready: The server is enabled, IP
communication is up and running,
and the RADIUS module is ready to
accept accounting attempts.
Dead (X seconds left): Accounting
attempts were made to this server,
but it did not reply within the
configured timeout. The server has
temporarily been disabled, but will
get re-enabled when the dead-time
expires. The number of seconds left
before this occurs is displayed in
parentheses. This state is only
reachable when more than one
server is enabled.
To Next Page
Loading...
Need help?
General