User’s Manual of GS-5220 LCD Series
509
4.16.8 LLDP PoE Neighbours
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port
on which an LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure
4-16-7 appears.
Figure 4-16-7: LLDP PoE Neighbour Screenshot
Please note that administrator has to enable LLDP port from LLDP configuration; please refer to the following
example (The screen in Figure 4-16-8 appears.). To enable LLDP function from port1 to port3, administrator has
to plug a PD that supports PoE LLDP function, and then administrator is going to see the PoE information of the
PD from LLDP.
To Next Page
Loading...
Need help?
General