User’s Manual of GS-5220 LCD Series
267
• QRI
Query Response Interval. The Max Response Time used to calculate the
Max Resp Code inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of seconds, default query
response interval is 100 in tenths of seconds (10 seconds).
• LLQI (LMQI for IGMP)
Last Member Query Interval. The Last Member Query Time is the time
value represented by the Last Member Query Interval, multiplied by
the Last Member Query Count.
The allowed range is 0 to 31744 in tenths of seconds, default last
member query interval is 10 in tenths of seconds (1 second).
• URI
Unsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report
interval is 1 second.
Buttons
: Refreshes the displayed table starting from the "VLAN" input fields.
: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest VLAN
ID.
: Updates the table, starting with the entry after the last entry currently displayed.
: Click to add new IGMP VLAN. Specify the VID and configure the new entry.
Click "Save". The specific IGMP VLAN starts working after the corresponding static VLAN is also created.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General