Planet GS-5220 Series User Manual

User’s Manual of GS-5220 LCD Series
357
• Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are
Disabled or the values 1 through 16.
The default value is "Disabled".
• Port Redirect
Select which port frames are redirected on. The allowed values are
Disabled or a specific port number and it can't be set when action is
permitted. The default value is "Disabled".
• Logging
Specify the logging operation of this port. The allowed values are:
■ Enabled: Frames received on the port are stored in the System
Log.
■ Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate are
limited.
• Shutdown
Specify the port shut down operation of this port. The allowed values
are:
■ Enabled: If a frame is received on the port, the port will be
disabled.
■ Disabled: Port shut down is disabled.
The default value is "Disabled".
• State
Specify the port state of this port. The allowed values are:
■ Enabled: To reopen ports by changing the volatile port
configuration of the ACL user module.
■ Disabled: To close ports by changing the volatile port
configuration of the ACL user module.
The default value is "Enabled".

Planet GS-5220 Series Specifications

General

Brand	Planet
Model	GS-5220 Series
Category	Switch
Language	English