User’s Manual of GS-5220 LCD Series
373
• RADIUS-Assigned
VLAN Enabled
RADIUS-assigned VLAN provides a means to centrally control the VLAN
on which a successfully authenticated supplicant is placed on the
switch. Incoming traffic will be classified to and switched on the
RADIUS-assigned VLAN. The RADIUS server must be configured to
transmit special RADIUS attributes to take advantage of this feature.
The "RADIUS-Assigned VLAN Enabled" checkbox provides a quick way
to globally enable/disable RADIUS-server assigned VLAN functionality.
When checked, the individual ports' ditto setting determines whether
RADIUS-assigned VLAN is enabled for that port. When unchecked,
RADIUS-server assigned VLAN is disabled for all ports.
• Guest VLAN Enabled
A Guest VLAN is a special VLAN - typically with limited network access -
on which 802.1X-unaware clients are placed after a network
administrator-defined timeout. The switch follows a set of rules for
entering and leaving the Guest VLAN as listed below.
The "Guest VLAN Enabled" checkbox provides a quick way to globally
enable/disable Guest VLAN functionality. When checked, the individual
ports' ditto setting determines whether the port can be moved into
Guest VLAN. When unchecked, the ability to move to the Guest VLAN is
disabled for all ports.
• Guest VLAN ID
This is the value that a port's Port VLAN ID is set to if a port is moved
into the Guest VLAN. It is only changeable if the Guest VLAN option is
globally enabled.
Valid values are in the range [1; 4095].
• Max. Reauth. Count
The number of times that the switch transmits an EAPOL Request
Identity frame without response before considering entering the Guest
VLAN is adjusted with this setting. The value can only be changed if the
Guest VLAN option is globally enabled.
Valid values are in the range [1; 255].
To Next Page
Loading...
Need help?
General